Xpro-P TTL Wireless Flash Trigger can not only control the flashes with built-in Godox wireless X system, e g. camera flashes, outdoor flashes and studio flashes.

Featuring multi-channel triggering and stable signal transmission, this flash trigger applies to hotshoe-mounted Pentax series cameras.

Features:
Built-in Godox 2.4G Wirless X System & Versatile Using Methods
- Can as a Wireless Godox Flash Trigger / Wireless Speedlites Trigger/ Wireless Shutter Release Trigger/ Flash Trigger with 2.5mm Sync Cord Jack

Support TTL II Autoflash and Professional Functions
-16 groups and 32 channels to wirelessly control and trigger. Add 01 to 99 wireless ID settings, which can only achieve triggering when the channels and wireless IDs of the master and slave unit are set to the same, avoiding signal interference effectively.

-Fully support TTL autoflash. 1/8000s high-speed sync, multi flash, manual flash, flash exposure compensation, TCM transform function, magnification function, one-shoot & multi-shcx)t setting, group modeling lamp control, group zooming, adjusting all groups1 output value simultaneously, etc.
Outstanding Design, Easy Operation and Great Portability
- Extra-large LCD panel, 5 group buttons and 4 function buttons offer convenient manipulation.
- Xpro-P is quite portable for it only weighs 80g
-Support Type-C USB firmware upgrade and wireless triggering by 2.5mm sync cord jack.

Compatible camera models:
Pentax K-1, 645Z, K70, K50, KP, K-S2, K-3II

Specifications:
Compatible cameras: Pentax series cameras (TTL autoflash)Support for the cameras that have PC sync socket.
Power supply: 2’AA batteries
TTL autoflash:TTL
Manual flash: Yes
Stroboscopic flash: Yes
High-speed sync : Yes
Second-curtain sync: Yes
Flash exposure compensation: Yes. 士3 stops in 1/3 stop increments
Flash exposure lock: Yes
Focus assist: Yes
Modeling lamp: Control the modeling lamp by the flash trigger
Beeper: Control the beeper by the flash trigger
Wireless setting: The receiver end can control the camera shooting through the 2.5mm sync cord jack
ZOOM setting: Adjust the ZOOM value by the transmitter
TCM function: Transform the TTL shooting value into the output value in the M node
Firmware upgrade: Upgrade through the Type-C USB port
Memory function: Settings will be stored 2 seconds after last operation and recover after a restart
Transmission range (approx.) : 0-100m
Built-in wireless: 24G
Modulation mode: MSK
Channel: 32
Wireless ID: 01-99
Group: 16
Display:Large LCD panel, backlighting ON or OFF
Dimension/Weight: 90x58x50mm/80g