Main features:
1.48kHz/24bit Audio Recording, Intelligent Denoise
2.USB-C Charging/Monitoring Port, Support Pass-through Phone Charging
3.USB Digital Output, Wide Compatibility for Phone, Computer, etc.
4.Built-in Lithium Battery, Battery Life Up to 6 Hours
5.Low Latency<20ms, Working Distance Up to 50m (Open Area)
6.IPS Screen for Intuitive Power and Audio Dynamic Monitor
7.Mono/Stereo Switch, 4-level Volume Adjustment and Mute Functions, etc.

Notice:
1. Due to 2.4G wireless characteristics, please keep face to face when use it, and don’t turn your back to the receiver, otherwise it is easy to generate breakpoints, which is a normal phenomenon.
2. Please pay attention that it can not realize STEREO function when in single-channel mode.
3. This product belongs to high-precision instruments, please avoiding falling, collision or pounding.
4. Do not use this equipment in the vicinity of heat source or interference source, the radiator, oven, refrigerator, air-conditioner ect.
5. Do not use the equipment in rain or in a damp environment to avoid short-circuit danger.

Main Features:
1.48kHz/24bit Audio Recording, Intelligent Denoise
High resolution lossless audio sampling, high audio recovery;
Built in intelligent noise reduction chip to deliver professional-quality sound.

2.USB-C Charging/Monitoring Port, Support Pass-through Phone Charging
The USB-C connection of receiver was made for charging and monitoring. Your phone can be charged by power bank /DC power through USB-C connection. It’s also equipped with a 3.5mm-USB C adapter cable, which supports 3.5mm and USB-C headphones for real-time monitoring.

3.USB Digital Output, Wide Compatibility for Phone, Tablets, Computers, etc.
It can be plugged into your cellphone, laptop, and PC, no extra software or device drivers are required. Going live or just shooting a quick video on your phone has never sounded so good.

4.Built-in Lithium Battery, Battery Life Up to 6 Hours
The transmitter is designed with a USB-C charging connection that supports charging while using, which can easily meet the needs of long time recording, and work efficiently.

5.Low Latency<20ms, Working Distance Up to 50m (Open Area)
Built-in antenna, long working distance and low latency. The audio can be transmitted stably in any situations.

6.IPS Screen for Intuitive Power and Audio Dynamic Monitor
All the information you’d need can be seen on the IPS screen. Monitoring audio dynamic,battery level, volume settings and signal strength.

7.Mono/Stereo Switch, 4-level Volume Adjustment and Mute Functions, etc.
RimoMic Pro features compact and lightweight, with mono/stereo two output modes, adjustable volume, one-touch muting and pairing, bringing streamers and videomakers more unmatched experience.

8.Unique Magnetic Belt clip and Badge Design, Highlight Your Appearance
Place the transmitter under your clothes and clip a badge on top,it has never been easier to start shooting a video with a microphone set up in seconds.

Specification
Transmission Type    2.4GHz
Transmitting Power    10dBm
Receiving Sensitivity    -90dBm
Antenna    Built-in Antenna
Polar Pattern    Omnidirectional
Frequency Response    80Hz ~ 20kHz
Maximum SPL    100dB
S/N    70dB
Equivalent Noise    24dBA
Dynamic Range    76dB
Sound Delay    <20ms
Sound Distortion    <1%
Audio Output Interface    USB-C
Battery    Li-ion Battery 
95mAh 3.8V
Battery Life    6 Hours
Net Weight    TX: 15g
RX: 11g
Dimension    TX: 53 x 19 x 15mm
RX: 55x 21 x 11mm
Operating Temperature    0℃ ~ 50℃
Storage Temperature    -20℃ ~ 60℃